Choosing the right electrical distribution switchgear protection starts with matching the panel to the system it will feed. You might need a low-cost 12V blade fuse block for a car or boat, a configurable module for a custom harness, or an OEM-specific panel for an Evinrude outboard. These four listings span $13.99 to $249, so the decision comes down to current capacity, circuit count, and whether you need a part that is pre-matched to a particular manufacturer.
Quick take: The Littelfuse FLEC3000Z-0 gives you a prepopulated 300A module for custom circuits; the Evinrude FICHT 0586754 is the only outboard-specific panel here; the XUKEY blade fuse box is a low-cost 12V option with LED blown-fuse indicators; and the DSX-1040PDP is the only one paired with a 1040DPM access system.
| Product | Listed price | Price bar |
|---|---|---|
| Littelfuse FLEC3000Z-0 Configurable Power Distribution Module | USD 160.00 | |
| Evinrude FICHT Power Distribution Panel 0586754 | USD 249.00 | |
| XUKEY 6/12 Way Blade Fuse Box | USD 13.99 | |
| DSX-1040PDP power Distribution Panel w/ 1040DPM Access System | USD 129.99 |
The listed prices span $13.99 to $249, and that spread reflects real differences in scope. The XUKEY is a simple 12V blade fuse holder. The DSX panel is a used access-system board. The Littelfuse module is a configurable 300A distribution block. The Evinrude panel is a used OEM outboard part.
Decision matrix
| Use case | Recommended pick | Why |
|---|---|---|
| Configurable high-current module | Littelfuse FLEC3000Z-0 | PrePopulated 300A, New - Open box, U.S. origin |
| Evinrude FICHT outboard replacement | Evinrude FICHT 0586754 | Matches 2002-2006 V4/V6, 2-stroke, used part |
| Compact 12V blade fuse distribution | XUKEY 6/12 Way Blade Fuse Box | LED blown fuse indicator, new, lowest listed price |
| Access system integration | DSX-1040PDP | Includes 1040DPM Access System, used panel |
Littelfuse FLEC3000Z-0 Configurable Power Distribution Module PrePopulated 300A
At USD 160.00, this is the module to look at if you want a configurable power distribution block with 300A capacity and a prepopulated fuse and relay layout. The listed condition is New - Open box, and the country of origin is the United States. The preinstalled colored fuses and black relays mean you do not have to source every component separately. The main plastic cover is included, and some units also have rubber caps over the lead terminals. The tradeoff is the open-box condition, so the mounting plate corners may show signs of installation. That makes it a stronger pick when you are building a custom distribution setup rather than if you need a sealed retail package.
Evinrude FICHT Power Distribution Panel 0586754 V4 V6 2002-2006
At USD 249.00, this is the highest listed price in the group, and it is clearly aimed at Evinrude FICHT outboard owners. The title pins it to V4 and V6 models from 2002-2006, and the attributes list a 2-stroke engine, OEM part number 0586754, and U.S. origin. If you need a panel with that specific part number, this is the only one in the group labeled for that application. Because it is used, the listing notes that normal wear may be present, and it carries a California Prop 65 warning. The listing also says the fitment range is only a guide, so the match to your specific engine is your responsibility. This is not a general-purpose fuse block; it is an outboard-specific replacement panel.
XUKEY 6/12 Way Blade Fuse Box Block Holder LED Car Boat Power Distribution Panel 12V
At USD 13.99, this is the lowest listed price in the group. It is a new 6/12-way blade fuse holder with a negative bus, an LED blown-fuse warning indicator, and 12V operation. The listed materials are a PC cover, PBT base, and tin-plated copper, with the description mentioning 30A per circuit and 100A per panel, while the attributes list fuse amperage in the 5-20A range. Compatibility is listed for cars, buses, ships, tankers, trailers, and boats. The limitation is that it is a straightforward fuse box rather than a configurable module or an OEM panel, so you need to size your circuit loads within the stated amperage range. For a simple 12V auxiliary circuit, it covers a lot of ground for a low listed price.
DSX-1040PDP power Distribution Panel w/ 1040DPM Access System
At USD 129.99, this used DSX-1040PDP panel is the one to consider if you need the 1040DPM access system pairing. The title is the key evidence: it is specifically built with that access system, and the country of origin is China. Unlike the automotive and outboard panels, this one reads like a specialized access-control distribution board, so it fits a different kind of installation. The main limitation is that it is listed as used, so the usual wear considerations apply. The model name and access-system pairing make it a useful option when you are working on a DSX-based setup, but it is not a new, sealed module.
Final recommendation by use case
If you are building a custom 12V circuit on a car or boat, the XUKEY 6/12 Way Blade Fuse Box is the straightforward choice at USD 13.99. If you need a prepopulated 300A distribution module, the Littelfuse FLEC3000Z-0 at USD 160.00 gives you the current capacity and configurable layout. If you are repairing an Evinrude FICHT V4/V6 outboard from 2002-2006, the Evinrude panel at USD 249.00 is the only OEM-matched option here. And if your project requires a DSX-style power distribution panel with the 1040DPM access system, the DSX-1040PDP at USD 129.99 is the one that fits that specific need.
